108 research outputs found

    Textile-based wearable sensors for assisting sports performance

    Get PDF
    There is a need for wearable sensors to assess physiological signals and body kinematics during exercise. Such sensors need to be straightforward to use, and ideally the complete system integrated fully within a garment. This would allow wearers to monitor their progress as they undergo an exercise training programme without the need to attach external devices. This takes physiological monitoring into a more natural setting. By developing textile sensors the intelligence is integrated into a sports garment in an innocuous manner. A number of textile based sensors are presented here that have been integrated into garments for various sports applications

    Educational change and ICT: an exploration of priorities 2 and 3 of the DfES e-strategy in schools and colleges: the current landscape and implementation issues

    Get PDF
    Landscape review of integrated online support for learners and collaborative approaches to personalised learning activities

    A wearable electrochemical sensor for the real-time measurement of sweat sodium concentration

    Get PDF
    We report a new method for the real-time quantitative analysis of sodium in human sweat, consolidating sweat collection and analysis in a single, integrated, wearable platform. This temporal data opens up new possibilities in the study of human physiology, broadly applicable from assessing high performance athletes to monitoring Cystic Fibrosis (CF) sufferers. Our compact Sodium Sensor Belt (SSB) consists of a sodium selective Ion Selective Electrode (ISE) integrated into a platform that can be interfaced with the human body during exercise. No skin cleaning regime or sweat storage technology is required as the sweat is continually wicked from the skin to a sensing surface and from there to a storage area via a fabric pump. Our results suggest that after an initial equilibration period, a steady-state sodium plateau concentration was reached. Atomic Absorption Spectroscopy (AAS) was used as a reference method, and this has confirmed the accuracy of the new continuous monitoring approach. The steady-state concentrations observed were found to fall within ranges previously found in the literature, which further validates the approach. Daily calibration repeatability (n 1⁄4 4) was +/- 3.0% RSD and over a three month period reproducibility was +/- 12.1% RSD (n 1⁄4 56). As a further application, we attempted to monitor the sweat of Cystic Fibrosis (CF) sufferers using the same device. We observed high sodium concentrations symptomatic of CF ($60 mM Na+) for two CF patients, with no conclusive results for the remaining patients due to their limited exercising capability, and high viscosity/low volume of sweat produced

    Aggregating multiple body sensors for analysis in sports

    Get PDF
    Real time monitoring of the wellness of sportspersons, during their sporting activity and training, is important in order to maximise performance during the sporting event itself and during training, as well as being important for the health of the sportsperson overall. We have combined a suite of common, off-the-shelf sensors with specialist body sensing technology we are developing ourselves and constructed a software system for recording, analysing and presenting sensed data gathered from a single player during a sporting activity, a football match. We gather readings for heart rate, galvanic skin response, motion, heat flux, respiration, and location (GPS) using on-body sensors, while simultaneously tracking player activity using a combination of a playercam video and pitch-wide video recording. We have aggregated all this sensed data into a single overview of player performance and activity which can be reviewed, post-event. We are currently working on integrating other non-invasive methods for real-time on-body monitoring of sweat electrolytes and pH via a textile-based sweat sampling and analysis platform. Our work is heading in two directions; firstly from post-event data aggregation to real-time monitoring, and secondly, to convert raw sensor readings into performance indicators that are meaningful to practitioners in the field

    Textile sensors to measure sweat pH and sweat-rate during exercise

    Get PDF
    Sweat analysis can provide a valuable insight into a person’s well-being. Here we present wearable textile-based sensors that can provide real-time information regarding sweat activity. A pH sensitive dye incorporated into a fabric fluidic system is used to determine sweat pH. To detect the onset of sweat activity a sweat rate sensor is incorporated into a textile substrate. The sensors are integrated into a waistband and controlled by a central unit with wireless connectivity. The use of such sensors for sweat analysis may provide valuable physiological information for applications in sports performance and also in healthcare

    Bio-sensing textile based patch with integrated optical detection system for sweat monitoring

    Get PDF
    Sensors, which can be integrated into clothing and used to measure biochemical changes in body fluids, such as sweat, constitute a major advancement in the area of wearable sensors. Initial applications for such technology exist in personal health and sports performance monitoring. However, sample collection is a complicated matter as analysis must be done in real-time in order to obtain a useful examination of its composition. This work outlines the development of a textile-based fluid handling platform which uses a passive pump to gather sweat and move it through a pre-defined channel for analysis. The system is tested both in vitro and in vivo. In addition, a pH sensor, which depends on the use of a pH sensitive dye and paired emitter-detector LEDs to measure colour changes, has been developed. In vitro and on-body trials have shown that the sensor has the potential to record real-time variations in sweat during exercise

    Wearable technology for bio-chemical analysis of body fluids during exercise

    Get PDF
    This paper details the development of a textile based fluid handling system with integrated wireless biochemical sensors. Such research represents a new advancement in the area of wearable technologies. The system contains pH, sodium and conductivity sensors. It has been demonstrated during on-body trials that the pH sensor has close agreement with measurements obtained using a reference pH probe. Initial investigations into the sodium and conductivity sensors have shown their suitability for integration into the wearable system. It is thought that applications exist in personal health and sports performance and training

    Building an International One Health Strain Level Database to Characterise the Epidemiology of AMR Threats: ESBL—AmpC Producing E. coli as An Example—Challenges and Perspectives

    Get PDF
    (This article belongs to the Special Issue Epidemiology of ESBL-Producing Enterobacteriaceae)Antimicrobial resistance (AMR) is one of the top public health threats nowadays. Among the most important AMR pathogens, Escherichia coli resistant to extended spectrum cephalosporins (ESC-EC) is a perfect example of the One Health problem due to its global distribution in animal, human, and environmental sources and its resistant phenotype, derived from the carriage of plasmid-borne extended-spectrum and AmpC ÎČ-lactamases, which limits the choice of effective antimicrobial therapies. The epidemiology of ESC-EC infection is complex as a result of the multiple possible sources involved in its transmission, and its study would require databases ideally comprising information from animal (livestock, companion, wildlife), human, and environmental sources. Here, we present the steps taken to assemble a database with phenotypic and genetic information on 10,763 ESC-EC isolates retrieved from multiple sources provided by 13 partners located in eight European countries, in the frame of the DiSCoVeR Joint Research project funded by the One Health European Joint Programme (OH-EJP), along with its strengths and limitations. This database represents a first step to help in the assessment of different geographical and temporal trends and transmission dynamics in animals and humans. The work performed highlights aspects that should be considered in future international efforts, such as the one presented here.This research was funded by Promoting One Health in Europe through joint actions on foodborne zoonoses, antimicrobial resistance, and emerging microbiological hazards–One Health EJP, grant number 773830 (DiSCoVeR). Research at the German Federal Institute for Risk Assessment, Germany, was partially supported by the internal project BfR-BIOS-08-43-001. Research at the National Institute for Agrarian and Veterinary Research (INIAV) was partially supported by the project PTDC/CVT-CVT/28469/2017 financed by the “Fundação para a CiĂȘncia e Tecnologia” (FCT), Portugal. Research at the National Veterinary Research Institute (PIWet), Poland, was also partially supported by the Polish Ministry of Education and Science from the funds for science in the years 2018–2022 allocated for the implementation of a co-financed international project. The environmental isolates from Ireland were collected as part of the AREST project, which is jointly funded by the Environmental Protection Agency, under the EPA Research Programme 2014–2020, and the Health Service Executive (2017-HW-LS-1). The isolates collected from pig farms in Ireland were collected as part of a Walsh Scholarship project funded by Teagasc (ref 2018027). Research at the VISAVET Health Surveillance Centre (Spain) was partially supported by the project Antimicrobial resistance transmission dynamics in the human-animal interface: Shaping the risk posed by epidemic plasmids (PID2021-125136OB-I00, Ministerio de Ciencia, InnovaciĂłn y Universidades, MICINN).info:eu-repo/semantics/publishedVersio
    • 

    corecore